Solar Road Safety LED Light System Solution Factory Price Traffic Warning Signal Light
Manufactuter Statement
New Belief Technology Co.,Ltd specialized in design, research, development, production and sales of Power Banks and Solar Products. We promise all batteries are 100% New Grade A Lithium Batteries, we never accept second-hand, refurbished or unknown batteries. Guided by the spirit of responsibility for the customers, we keep improving the product quality and strict management of production to ensure every product is qualified before leaving our factory.
AraTabella Maintenance is minimal since the solar panel takes care of charging the built-in battery and the battery supplies three powerful white LEDs which can light for more than 48 consecutive hours when fully charged. This is to be able to guarantee the 8-10 hours per night even in cloudy days. 2-3 hours of sun is enough to charge the battery.
Battery pack serves for more than 2 years however when the battery starts aging beyond 2 years the light duration reduces gradually. If AraTabella is mounted places where direct sun is not present, the battery will charge less and thus may switch OFF before.
This device has a built-in dusk/dawn sensor and can automatically switch ON at sunset and OFF at sunrise.
It also has four small blue LEDs to indicate charging in progress and battery charge level.
Solar panel is also rotatable to be easily set facing south whilst the LEDs are pointing at the road sign.
AraTabella is a CE certified product with Compliance Certificate Nos. LST190968055E, LST190968055F and LST190968055R.
Installation
Very few and non-expensive tools are required to install AraTabella. All you need is a small ladder to reach the top of the road signs with safety, a batteryoperated drill, 4.2mm drill bit, size 10mm spanner and a pop-riveting tool. It is also good practice to have a set of traffic cones to divert traffic away from you when installing.
Step 1. Connect the two wires together and screw the connetor
Step 2. Using a small, pointed item or a paper clip, insert in Selection Switch hole and press switch for 5 seconds. Press once to switch ON or OFF, two consecutive presses to select front red LED.
Step 3.
Mark holes on the front of the sign, but keep in mind that the bracket is to be mounted from the back side.
Mark holes on the front of the sign, but keep in mind that the bracket is to be mounted from the back side.
Step 4.
Drill the four holes.
Step 5.
While holding the bracket at the back of the sign,
insert the pop-rivet and crimp with the tool.
After the first rivet is done, proceed with the remaining
Drill the four holes.
Step 5.
While holding the bracket at the back of the sign,
insert the pop-rivet and crimp with the tool.
After the first rivet is done, proceed with the remaining
Step 6.
Set the Solar panel to face South and tighten the nut with a size 10 spanner. Avoid mounting in positions where it is not reached by any direct sunlight as this may have effect on the charging of the battery
Step 7.
Test the product by covering the sensor. LEDs should light ON. Flashing blue LED will indicate charging and level of battery charge. Four blue LEDs not flashing means fully charged.
Q: How many days I can get goods after payment?
A: Usually, about the sample, we will ship the goods within 3 days after we receive the full payment. The bulk order will need 15
working days after we receive the deposit, and we will ship the goods after we receive the balance.
Q: Can you make our Customized Design or put our Company Logo on the product?
A: Sure,we can do this since we are the factory! : )
Q: What's the payment terms?
A: We accept T/T, Paypal, western union and Alipay.
Q: How can I get the samples?
A: If you need some samples to test, please pay for the shipping cost and sample cost.
Q: Why Choose Our Products?
A: 1. High Quality.
2.Factory price.
3.Small MOQ.
4. With professional test standards, inspected by professional QC team.
5. Various colors for preference, and OEM is avaliable.
A: Usually, about the sample, we will ship the goods within 3 days after we receive the full payment. The bulk order will need 15
working days after we receive the deposit, and we will ship the goods after we receive the balance.
Q: Can you make our Customized Design or put our Company Logo on the product?
A: Sure,we can do this since we are the factory! : )
Q: What's the payment terms?
A: We accept T/T, Paypal, western union and Alipay.
Q: How can I get the samples?
A: If you need some samples to test, please pay for the shipping cost and sample cost.
Q: Why Choose Our Products?
A: 1. High Quality.
2.Factory price.
3.Small MOQ.
4. With professional test standards, inspected by professional QC team.
5. Various colors for preference, and OEM is avaliable.